COMBINED DRAWING MACHINE

Our combined drawing machine is complex combination, and the production will be high – efficiency and guarantee to achieve best quality. Except the combined drawing machine, we can offer related device that can match the production line. For example, Coil Opener, Chamfering Machine, Push Pointer, Shot Blasting Machine, Straightening and Polishing Machine, Swaging Machine and Pointing Machine.

Type Round Hex Square Max. Tension Drawing Speed Shearing Force
mminch mminch mminch Kglbs mt/minft/min N-mtp-ft
SH-0Ø3 - Ø8Ø0.12 - Ø0.31H2 - H7H0.08 - H0.28S3 - S6S0.12 - S0.242000440080262142105
SH-1Ø5 - Ø13Ø0.20 - Ø0.51H5.5 - H11H0.22 - H0.43S5.5 - S9S0.22 - S0.354000880070230142105
SH-1BØ5 - Ø16Ø0.20 - Ø0.63H5.5 - H14H0.22 - H0.55S5.5 - S14S0.22 - S0.5550001100070230142105
SH-1CØ6 - Ø20Ø0.24 - Ø0.79H6 - H18H0.24 - H0.71S6 - S18S0.24 - S0.71100002200060197142105
SH-2Ø10 - Ø25Ø0.39 - Ø0.98H10 - H22H0.39 - H0.87S10 - S22S0.39 - S0.87100002200060197525387
SH-3Ø16 - Ø36Ø0.63 - Ø1.42H16 - H32H0.63 - H1.18S16 - S30S0.63 - S1.18250005500060197525387
SH-4Ø30 - Ø60Ø1.18 - Ø2.36H30 - H50H1.18 - H1.97S30 - S45S1.18 - S1.7740000880002582--
Type Total Power Total Weight Coil Weight, max Straightness Cutting Length
KWHPBtu/h Tonlbs Tonlbs mm/mtinch/ft mtft
SH-0801072731533060366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-11121503821941876366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-1B1451944952146284366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-1C1802406122452896366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-22403228193474936366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-3310416105861134444366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7
SH-4---78171912366120.1 - 0.80.0019 - 0.01492 - 66.6 - 19.7

DRAWING SECTION

The casting part is above FC25 level and base is
machined in one piece. It is high precision and
strength.
All rectangular rail and V shape rail were replaced with
liner rail to provide better durability and substitute
nature. Twin cam use manufactured by forging with
alloy and processed by 5 axis machine. The precision
and durability provides long-time running without wear
and it makes the movement of the gliding set smoothly.

DYNAMIC SHEAR

Using servo motor to drive the unit and the gear
wheel, collocate with high precision linear rail and
use oil hydraulic cutting.

POLISHING AND STRAIGHTENING MACHINE

The polishing and straightening machine equips with two pairs
of polishing disc and five to seven straightening rings that
simultaneously straighten and polish the bar.
During the machine running, lubricant is continuously circulated
which achieves best lubrication for the polishing disc, straightening ring and bars.

VERTICAL ROUND BAR
STRAIGHTENING MACHINE

This machine equipped with one concave and one convex
rollers. The bar passed two rollers can get the straightness and
polish efficiency. Moreover, this machine equips the MMI(touch
monitor) to set the paramefers, and figures are capalble to be
recorded.

COIL OPENER

The coil opener can pull out the end of large diameter wire coils quickly and easily. The crooked part of
wire will pass through the straightening rollers and
be straightened.(This unit is optional)

HYDAULIC PUSH POINTER

The push pointer mechanism uses hydraulic power
to push the wire end into the drawing die.(This is only
suitable for the wires over 18mm diameter)(This unit
is optional)

STRAIGHTENING AND POLISHING MACHINE

The bar is straightened with adjustable tungsten straightening ring by rotating.
The advantage is to make the whole bar be
straightened equally and eliminate the
tension of the bar. So that, the quality of bar
gets better improvement

COIL PAY-OFF STAND

‧90 degree Tilt-able Coil Pay-off stand.
‧360 degree Circumgyration Coil Pay-off stand.
‧Loading weight of Coil Pay-off stand :3 ton.

CURVATURE INSTRUMENTATION

This machine uses the gauge to measure the straightness of the bar. Round bar, hexagonal bar and square
bar are all available